<< Back to 2010 Toro Commercial Specialty Equipment / Debris
2010 Toro Commercial 22324
Diesel. Done Right.
Our new diesel models deliver what customers want: extra torque, longer engine life, and increased hydraulic flow for enhanced performance of ground-engaging attachments. And because they're part of the full-line family, these diesels are compatible with all of Toro's compact utility loader attachments.
Features
All
Exclusive Track Drive - The 9.5" wide Kevlar® reinforced tracks, designed specifically for the Toro Dingo TX to offer excellent traction and floatation even in the most difficult conditions. This means you can power through the toughest jobs and still be light on the turf.
Compact Size - Narrow enough so you can bring hydraulic power easily into 42" access points; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability.
Simple Controls - You're up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms - all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly.
Liquid-Cooled Diesel Engine - The 25 hp Kubota® diesel engines torque curve combined with the added auxiliary hp provide attachments the added power tough jobs require.
4-Pump Hydraulic System - 4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!
Hydraulic Power - The TX 525 models' auxiliary hydraulic performance makes the most challenging ground conditions irrelevant by pumping 24 hp to the attachment. Four independent hydraulic pumps deliver: 16.9 gpm of flow to each track, 13.8 gpm to the auxiliary, 6 gpm to the loader arm
2010 Toro Commercial 22324
Specifications
Engine
- Engine
- 25 HP Kubota®
- Cooling
- Liquid
Chassis
- Steering
- Single control w/ ref. bar
Dimensions
- Track
- Endless Kevler reinforced rubber
- Ground Clearance
- 4.6"
- Length
- 70.7"
- Width
- 41"
- Height
- 46.1"
- Weight
- 2001 lbs.
- Capacity
- (Reservoir) 10.5 gal
- Ground Pressure
- 3.4 psi
General Information
- Flow
- (Auxilary) 13.8 gpm
(Loader Arm) 6 gpm
(Traction) 16.9 gpm - Ground Speed
- 0-4.5 mph fwd; 0-2mph rev.
- Warranty
- (Engine) Two Year; (Product) One Year
- Control
- Key, throttle, choke
Hydraulics
- Hydraulic System
- 3000 psi system relief pressure
